Seaga JDL-2 COMBO, Руководство по обслуживанию и запасным частям

Страница: 51 / 78

51 JDL V1.0 8 2022
Motor Errors
Error Message
Description Possible Solutions
Motor [Number] Open The motor indicated or harness to
that motor has an open electrical
connection.
Check the motor and motor harness
for open connections. Test vend motor.
Replace if necessary.
Motor [Number] Short The motor or harness has an elec-
trical short.
Check motor and motor harness for
short. Replace if necessary.
Motor [Number] Home Sns The motor home switch was not
detected while the motor was in
operation. This may also indicate a
motor jam condition.
Check motor type service mode setting,
motor, motor switch and then spiral for
blockage. Test vend selection motor if
necessary.
Motor [Number] Jam A motor jam has been detected. Check motor and spiral for blockage.
Motor [Number] Errors One or more motor errors have
been detected.
Test vend selection motor and review
information on motor open, short, home
switch and jam conditions.
Motor Under Voltage The detected motor voltage is not
high enough to run the selection
motors.
Test vend selection motor for correct
operation. Replace motor. Replace VMC.
Temperature Sensor Errors
Error Message
Description Possible Solutions
Refrig Sensor # Open A temperature sensor or harness is
considered to have an open elec-
trical connection. Where # is the
sensor number.
Check sensor and sensor harness for
open connections. Check for sensor
readings. Replace sensor if necessary.
Refrig Sensor # Short A temperature sensor or harness
is considered to have an electri-
cal short. Where # is the sensor
number.
Check sensor and sensor harness for
shorted connections. Replace if neces-
sary.
Refrig Health Safety The cabinet temperature and time
limit settings have been exceeded.
Check sensor readings and sensor
harness for shorted connections. Check
for sensor readings. Replace sensor if
necessary.
Vend Sensor Errors
Error Message
Description Possible Solutions
Optical Sensor Error Not Applicable NA