4–TEC SC Models
FINAL PREPARATION
N
N
N
NO
O
O
OT
T
T
TE
E
E
E::::
This procedure should be explained to
customer at delivery.
N
N
N
NO
O
O
OT
T
T
TE
E
E
E::::
Verify fuel line connectors prior to
powering-up the MPEM. This verification must be
done visually as well as manually by physically
checking each connection.
WARNING
Never install the safety lanyard prior to check
fuel line connector tightness.
Fuel System Pressurization
WARNING
At PDI, whenever doing any type of repair on
the watercraft or if any components of the fuel
system are disconnected, a pressure test must
be done before starting the engine. Ensure
to verify fuel line ends for damage. Always
cut-away damaged end before reinstallation.
For fuel system pressure test procedure, refer to
last year Bombardier Sea-Doo
Shop Manual
.
Coolant Level
1
F18E0M6
WARNING
Check coolant level with engine cold. Never add
coolant in cooling system when engine is hot.
Remove seat extension to expose cooling system
expansion tank [[[[1]]]].
Predelivery
2004-1
7 / 15
