background image

Troubleshooting          

 

 

 

 

 

 

 

What to do if … 

 

… the spot light does not respond to remote control. 

 

Press and hold button for 2 seconds. 

 

Move to a location that is less than 15 m away. 

 

Move to a location that has no obstructing structure between remote control and spot light. 

 

Make sure the light is not mounted on any metal surface and there is sufficient clearance below. 

 

Replace battery for remote control. 

 

Check whether the last digits of serial numbers inside light housing and inside remote control are 

identical. 

 

… the light cannot be turned on. 

 Secure 

light 

bulb. 

 

Replace light bulb. 

 

Check if correct type of telephone line (RJ11 6P4C Pin 1-1 straight through) is used. 

 

… the spot mode or flood mode does not function. 

 

Replace light bulb. 

 

… the spot light does not respond to any control. 

 

Check voltage of inboard battery. 

 

Check the fuse or circuit breaker that protects spot light and joystick control panel. 

 

Carefully uninstall the spot light.    Examine the electrical connections and wire harness. 

 

Check if correct type of telephone line (RJ11 6P4C Pin 1-1 straight through) is used. 

 

Do not replace a blown fuse until the cause of spot light malfunction is identified and resolved. 

 

DO NOT replace a blown fuse with a fuse that takes higher current. 

 

… the spot light halt during operation. 

 

Return spot light and joystick control panel to dealer for further inspection. 

 

… the spot light cannot rotate in certain direction. 

Installation work and repairs to electrical components of this product must only be 

carried out by a suitably qualified and competent person in accordance with current 

local and national safety regulations.    Repairs and other work by unqualified persons 

could be dangerous.    The manufacturer cannot be held liable for unauthorized work. 

Содержание 405620-3











Отзывы: