Website: www.seada.co.uk
6 / 26
3. System Connection
The SDCP9 can active different ports at the same time. It means that every button can
send RS232, RS485, TCP/IP and IR control signal synchronously.
The demo system diagram as below:
TX
RX
TX
RX
TX
RX
IR
T
C
P
IP
/
12V
PWR
Y
Z
Y
Z
+
-
+
-
IR(1)
IR(2)
Wireless Route
IR Remote
IR Emitter
IR Emitter
IR:
TCP/IP:
RS232 :
1)
Connect the SDCP9 to a
LAN
port of Wireless Route.
2)
Connect a control PC to the Wireless Route.
3)
Connect the third-party devices (such as matrix switcher and scaler switcher) to the
LAN
port of Wireless Route.
4)
Connect the third-party devices (such as matrix switcher, scaler switcher and
projector) to
RS232 (1)
,
RS232 (2)
and
RS232 (3)
ports.
5)
The third-party devices which support RS485 communication can be connected to
RS485 (4)
and
RS485 (5)
ports.
6)
Connect the IR Emitters to
IR (1
) and
IR (2)
ports.
7)
Plug in 12V DC power supply adapter.
Note: The control PC can be directly connected to the TCP/IP port of
SDCP9 to
customized button functions. After buttons programming, disconnect the PC, and then
connect the third-party device to
the TCP/IP port.
