______________________________________________________
WTS32 Wireless Thermostat
950-0160revB February 2, 2012
18
Receiver mounting
● Option 1:
Tools required:
To install receiver the following tools and materials are needed.
■ Slotted screwdriver ■ Small Phillips screwdriver ■ Hammer ■ Electric drill and 3/16” drill bit.
This unit includes #6 X 1 slotted screws and wall anchors for mounting. Find an acceptable place to mount the receiver (about
60 inches off the floor and in an area with good air circulation). Do not mount in an enclosed metal cabinet or damp area. Using
the receiver as a template, mark each hole. Drill the holes, being mindful of what may be behind the mounting area (electrical
wires, etc.). Use the screws to mount the receiver.
● Option 2:
Locate receiver in an area with good air circulation.
Clean mounting surface thoroughly. Remove protective
plastic from one side hook and loop fasteners. Press to mounting
surface. Remove remaining plastic film and press receiver
firmly to mating hook and loop fasteners.
