background image

AUTOSTART   SWING    FAN SPEED

AUTOSTOP     HOUR           MIN

1). Press the AUTOSTART button
to set the TURN ON timer

2). The clock will display the turn

on time.

3). Press the HOUR and MIN  buttons

 to set the turn on time.

Each time the HOUR button is

 pressed will increment the time by 
1 hour. Each time the MIN button is

pressed will increment the time by

10 minutes.

4.) Press the AUTOSTART button 

again will release the timer.

NOTE: The clock must be set in order
for the AUTOSTART mode to function

properly

AUTOSTART   SWING    FAN SPEED

AUTOSTOP     HOUR           MIN

1). Press the AUTOSTOP button
to set the TURN ON timer

2). The clock will display the turn

off time.

3). Press the HOUR and MIN  buttons

 to set the turn off time.

Each time the HOUR button is

 pressed will increment the time by 
1 hour. Each time the MIN button is

pressed will increment the time by

10 minutes.

4.) Press the AUTOSTOP button 

again to release the timer.

NOTE: The clock must be set in

order for the AUTOSTOP function

to work properly.

The Autostart function will start the

unit in the last selected mode.

The Autostart function will turn the

unit ON when the selected time

is reached.

During the “ON” period, modes, fan

speeds, and temperatures may be

adjusted.

If the unit is “ON” when

 AUTOSTART is selected, it will turn

OFF until the selected time is

reached.

The Autostart function will stop the

unit in the last selected mode.

The Autostart function will turn the

unit OFF when the selected time

is reached.

NOTE: The AUTOSTART and AUTOSTOP timers can be used in combination with each other. 
For example, to have the unit come on and run for 3 hours beginning at 10:00 am  set the AUTOSTART time to 10:00 am, and set the AUTOSTOP time to 1:00 pm.
At 10:00 am, the unit will turn on in the selected modes, and turn off at 1:00 pm.
The timer which is set to the earliest time will activate first. For example, if AUTOSTOP is set for 10:00 am and AUTOSTART is set for 11:00 am, the unit will turn off at 10:00 am and turn back on
at 11:00 am.
The time settings will remain in memory of the remote until changed, but AUTOSTART and/or AUTOSTOP are not recurring events, and  must be activated again by pressing AUTOSTART or 
AUTOSTOP again if desired.
Pressing the AUTOSTART button or the AUTOSTOP button during the set time period will cancel that operation.
When the unit is running, press the AUTOSTART to set the start time will make the unit turn off immediately and the unit will turn on at the time you just set. When the unit turns off, press the
AUTOSTOP to set the stop time will make the unit turn on immediately, and the unit will turn off at the time you just set. 

USE OF THE REMOTE CONTROL (AUTOSTART MODE)                                                                USE OF THE REMOTE CONTROL (AUTOSTOP MODE)

-7-

 SLEEP

MODE

VANE CONTROL

 SLEEP

MODE

VANE CONTROL

Содержание 12H43YCX













Отзывы: