USE OF THE REMOTE CONTROL (COOL MODE) USE OF THE REMOTE CONTROL (HEAT MODE)
AUTOSTART SWING FAN SPEED
AUTOSTOP HOUR MIN
1) Press the ON/OFF Button to
turn the unit ON
2) Press the MODE Button
and select the COOL Mode
FAN SPEED Button
4) Press the FAN SPEED
Button to select the desired
fan speed
Temperature adjusting procedure during AUTO SELECT operation
5) Press the ON/OFF Button
or select another mode to
stop the COOL mode.
3) Press the + or - Buttons
to adjust the room temperature
Each press of the button will
change the temperature 1°
The COOL mode activates the
outdoor compressor as
necessary to satisfy the
selected room temperature.
-5-
AUTOSTART SWING FAN SPEED
AUTOSTOP HOUR MIN
1) Press the ON/OFF Button to
turn the unit ON
2) Press the MODE Button
and select the HEAT Mode
FAN SPEED Button
4) Press the FAN SPEED
Button to select the desired
fan speed
Temperature adjusting procedure during AUTO SELECT operation
5) Press the ON/OFF Button
or select another mode to
stop the HEAT mode.
3) Press the + or - Buttons
to adjust the room temperature
Each press of the button will
change the temperature 1°
NOTE: When the outside temperature is very
low and the humidity is very high, frosting will
occur on the heat exchanger of the outside
unit. When this happens, the auto-defrost will
turn on to to defrost the heat exchanger.
Heating will be suspended for 5 to 10 minutes
while the defrost cycle completes. At the end
of the defrost cycle, normal heating will resume.
During the defrost cycle, steam may be seen
coming from the outside heat exchanger. This
is normal and is of no concern.
The HEAT mode activates the
outdoor compressor as
necessary to satisfy the
selected room temperature.
SLEEP
MODE
VANE CONTROL
SLEEP
MODE
VANE CONTROL
