DOCS-004 Manual, LBV300-6 and LBV600-6 Rev C – 12APR10 Page 5 of 8
3.0.8 When connected correctly, the fiber connector locking sleeve will be seated
almost flush to the bulkhead.
3.0.9 If the connector does not fully seat, visually inspect for the following problems:
1. The ID key is not aligned correctly
2. Water in the bulkhead connector
3. Foreign object or debris in the bulkhead.
3.1 Data Communications error, and or loss of video.
The image on the next page is the “Local” Fiber Optic Board, (PCA039) mounted in the
Pull Out Hub of the Universal Reel System. By component layout, it is identical to the
board mounted in the camera chassis of the LBV. The part number for the LBV board is
PCA038 for reference.
Connector Key
Correct Seating
Incorrect Seating
