English
| P
age 3 | Quick Reference for SEABOB |
Switching off (to Sleep mode)
SEABOB
Information display (power is displayed as "0 %")
Prompt "sleep mode - confirm with trigger"
appears
SEABOB is switched off (Sleep mode)
User
1. Tap button combination silver – blue
in quick sequence
2. Push Trigger (within 5 seconds)
SEABOB
Information display appears
Power increases by one Power Level
with every tap of the button
Power decreases by one Power Level
with every tap of the button
SEABOB starts (minimum power of Power Level 1)
SEABOB stops
User
1. Switch on SEABOB
2. Tap green button (repeatedly) to increase
the power (also during operation)
3. Tap red button (repeatedly) to decrease
the power (also during operation)
4. Push Trigger against Controlgrip
5. Release Trigger
Operation
Note:
Always observe accumulator charge state. When the accumulator is discharged to approx. one third of
its charge state, the maximum power is automatically reduced incrementally to save the accumulator cells.
➞
➞
Settings
SEABOB
Information display (power is displayed as "0 %")
Owner-PIN prompt appears
PIN is verified and menu (upper menu level)
appears
Select list or entry mask appears
(depending on the menu item selected)
Select list: setting of maximum diving depth,
maximum power, display brightness
Entry mask: setting of operating time limit,
User PIN, date / time
Settings are confirmed , upper menu level appears
Information display appears
User
1. Tap button combination silver – blue – red
in quick sequence
2. Enter Owner-PIN and confirm with Trigger
(see below)
3. Switch between menu items with green
or red button and select by pushing Trigger
4. Select list: tap green or red button to scroll
between individual preset values
5. Entry mask: tap green or red button (repeatedly)
to increase or decrease value, tap blue or silver
button to move cursor to the left or to the right
6. Push Trigger against Controlgrip
7. Tap green or red button until the menu item
"exit" appears, select by pushing Trigger
Note:
The Timer limiting the operating time is activated at an operating time greater than "0:00".
➞
➞
➞
➞
➞
➞
➞
Note:
If no actions are performed by the user within 10 minutes (Time-off), the system will switch off automa-
tically to Sleep mode.
➞
➞
➞
➞
➞
Entering PIN
SEABOB
Digit under cursor decreases
Digit under cursor increases
Cursor moves to the left
Cursor moves to the right
PIN is confirmed and verified
User
1. Tap red button (repeatedly)
2. Tap green button (repeatedly)
3. Tap blue button (repeatedly)
4. Tap silver button (repeatedly)
5. Push Trigger against Controlgrip
➞
➞
➞
➞
➞
Note:
Please find your Owner-PIN on the supplied certificate.
