SEABOB CAYAGO F7, Руководство по эксплуатации

Страница: 46 / 82

| P
age 46
|
SEABOB
Operation
Manual
|
5
5.5 Before starting
Switch on the SEABOB.
We recommend that you switch on the SEABOB and per-
form a brief function check before you place the craft in
the water. To do this, proceed as follows:
1. Tap the blue button.
2. The display is switched on, and the SEABOB logo ap-
pears.
3. Pull the Powergrip against the Controlgrip (within
3 seconds), and hold it there for at least 1 second.
4. The software version number under the SEABOB logo
disappears after 1 second.
5. Release the Powergrip completely.
6. The User-PIN or Owner-PIN prompt will appear (if ac-
tivated). If the PIN prompt has been deactivated, the
operation display will appear directly.
Note: The PIN prompt when switching on the device
can be activated using the optional software available
on CD.
7. The stop symbol on the top left-hand side of the dis-
play will flash for approx. 6 seconds. After the stop
symbol disappears, the self check is complete and the
motor‘s electronic system is activated.
8. The power is displayed as "0 %" in the power display.
Tap the green button on the right Controlgrip once.
When you tap the button, the power shown on the dis-
play increases to the next higher power level ("10 %").
9. Together with another person, lift the SEABOB by the
carrying handles on each side, and place it in water
that is at least 1 m deep. You can also move the SEA-
BOB using the SEABOB-Cart (optionally available ac-
cessory).
Never carry the SEABOB by the Controlgrips, front
bumper or display panel but only by the carrying
handles on each side.
10. The SEABOB is now ready for operation.
If you are launching the SEABOB from a boat,
always have another person help you put the
SEABOB in the water and take it out (in particular, in
waves). Ensure that no one is under the SEABOB. Danger
of injury!