manualshive.com logo in svg

Seaboater 100, Спецификации

Поделиться
Скачать
Seaboater 100 Скачать руководство пользователя страница 28

2 Bulkhead Mount Thermostat Controls (1 for each box).
2 Exterior/Remote Mounted Temp Gauges.
1 Custom Fridge Box.
1 Custom Freezer Box.
* Pump & Condenser Hardware Specified by Supplier.
1 Frigomar IceMaker Mod. 3006

8.3. Hydraulic System

The vessel will be fitted with two hydraulic systems.

A Lewmar Commander system or equal for driving the primary services.
A manual Navtec system or equal for driving the rig hydraulics.

Main Hydraulic System.
Lewmar Commander 400 or equal power pack located in the engine room for the
following functions:

1.  Furler (Reckman RF90-3).
2.  Windlass (Lewmar Concept 3 Hyd, Flow 10-40 l/min, Max Pressure 175 bar).
3.  Self Stowing Anchor Arm (Rotary Actuator for 64 kg.m).
4.  Bow Thruster (Max-Power Mod. 315, Flow 28-35 l/min, Pressure 220-260 bar).
5.  2 Primary Winches (Lewmar 111/3AHST).
6.  2 Halyard Winches (Lewmar 66/3 AHST).
7.  1 Main Sheet Drum Winch (Lewmar LMS600, Flow 50 l/min, Max Pressure 140

bar).

8.  1 Main Halyard Drum Winch (Lewmar LMS600, Flow 50 l/min, Max Pressure 140

bar), (Subject to review with Sparmaker).

9.  Lifting Keel Ram (To lift plus/minus 8.75 tons, Stroke 1.6m).
10. Transom Door ( 2 x –12FE Cylinders).

Manual Hydraulic System.
Navtec or equal, two speed hand pump for rig hydraulics with the following functions:

1.  Backstays (2 x –22LE Cylinders).
2.  Outhaul (-17FE Cylinder).
3.  Vang (-40 Series 85A).
4.  Genoa Halyard (-17LE Cylinder).

Mast Jack
Mast step jack (for mast load of 15000 kgs) to be Enerpac system or equal, to be
pumped using separate hand pump.
The system shall be engineered and supplied by the Hydraulics Supplier. The Builder
shall be responsible for installation of the system, including piping. There is a power
pack, a fluid reservoir, plus distribution manifolds with solenoid operated valves.
Hydraulic motors for the winches, Leisure Furl boom and windlass shall be as supplied
by those manufacturers.
There will be a control panel in the aft cockpit for adjustment of these rigging functions.

All hydraulic piping is to be neatly laid out with the maximum use of continuous, straight
runs and support at regular intervals.
All fittings shall be stainless steel as described in the Piping Systems Table.

28

Содержание 100
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды