Sea&Sea MDX-7D, Инструкция по эксплуатации

Страница: 18 / 31

E-17
Mounting the Camera in the Housing
パチン錠を閉める
Removing the camera from the housing
1
Open the locking latches
2
Remove the rear case
3
Remove the sync connector from the camera's accessory shoe
4
Set the quick lock to the OPEN position
5
Slide the camera toward you as you remove the front case

Make sure that the O-ring is properly fitted in the O-ring groove before
setting of the rear case.
See:
“Opening and Closing the Housing” (P.E-11)
Close the locking latches
11
Set the rear case in alignment
with the guide pins (right and
left) on the front
10
8

Live View function is only activated
when Live View Shooting is set to
[Enable] using the camera's menu
function. Refer to the camera's
instruction manual for details.
Set the camera's power switch
to OFF, and set the Live View
shooting/Movie shooting switch
to < >
9

Make sure to match the switch settings
on the camera and with those on the
housing. Those switches cannot be
operated if the settings do not match.
Set the housing's power switch
to OFF, and set the Live View
shooting/Movie shooting switch
so as to uncover the < > icon
(switches are on the rear case).
Camera's settings
Housing (rear case) setting
Power switch Live View shooting/
Movie shooting switch
Live View shooting/
Movie shooting switch
Power switch
START
STOP
ON OFF
M
B
Av Tv P
CA
C1
C2
C3