Sea&Sea MDX-7D, Инструкция по эксплуатации

Страница: 17 / 31

E-16
Mounting the camera in Housing
Align the quick lock with the LOCK position to fix the camera
in place
7

When inserting or removing the
sync connector, be sure to hold the
connector part. If you push or pull
on the cord part, it could damage
the sync connector or cause
contact failures.
Align the quick shoe with the quick
shoe base, and slide the camera
fully forward into the front case
Insert the sync connector into
the camera's accessory shoe

Move the sync connector clear of the
front case.

Do not pop up the camera's built-in
flash.

To make sure that the gear attached
to the lens and the gear on the front
case do not hit each other, rotate
the focus / zoom dial while sliding
the camera into place.
CAUTION
6
8
Attach the lens to the camera, and then set the focus mode
(AF or MF)
4
Remove the sync connector
from the connector holder inside
the front case, and make sure
the quick lock is in the OPEN
position
5
Sync connector
Quick lock
Quick shoe base
Connector holder