Sea&Sea MDX-?6000, Инструкция по эксплуатации

Страница: 15 / 27

Mounting the camera in the Housing
1
Open the locking latches
2
Remove the rear case
3
Set the quick lock to the OPEN position
4
Slide the camera toward you as you remove the front case
Removing the camera from the housing
CAUTION
If you find the fix screws are too tight, use a coin or similar object to loosen
the screws.
Make sure that the O-ring is properly fitted in the
O-ring groove before setting of the rear case.
9
Close the locking latches
See:
“Opening and Closing the Housing” (P.E-9)
8
Attach the L-hook to the front case
Be sure to set the power switches
of the camera and housing to
"OFF" before setting the rear case.
E-14
L-hook