Sea&Sea MDX-?6000, Инструкция по эксплуатации

Страница: 14 / 27

E-13
Mounting the Camera in the Housing

Make sure to remove the eyecup from
the camera. If used with the eyecup
in place, it could cause flooding.

Remove the strap or the LCD monitor
cover from the camera, if any of these
accessories are attached.
CAUTION
Make sure the quick lock is in
the OPEN position
5
Using the included attachment
tool, fix the quick shoe to the
camera's tripod socket
2
Attach the lens to the camera
3
Align the quick shoe with the
quick shoe base, and slide the
camera fully forward into the
front case
6

To make sure that the gear attached
to the lens and the gear on the front
case do not hit each other, rotate
the focus / zoom dial while sliding
the camera into place.
Rotate the quick lock in the
OPEN direction ( ), and
then remove the quick shoe
from the front case (
)
1
4
Set the power switches of the
housing and camera to OFF
Align the quick lock with the
LOCK position to fix the
camera in place
7
Fixing screw
Lens release
button
pulled up outside