Sea&Sea MDX-5D Mark III, Инструкция по эксплуатации

Страница: 4 / 28

E-3
Safety Precautions

Do not rest heavy weight on the product. It might deform the outer casing, damage
internal parts, make the waterproofing fail, or result in fire or electric shock.

Please note that some marks may be left on the camera scraping against the dials
or gears of the housing.

Handle the product carefully so as not to scratch the front port, the lens, the flash
window or the finder.

Always dry the front port, the lens, the flash window or the finder using a soft cloth to
prevent stain or salt residue from marring the glass surface.

Rinse the product with fresh water, after underwater use. Ensure that the product is
waterproofed before rinsing. Refer to [Maintenance and Storage] (P.E-22) for details.

Never use chemicals, cosmetics, any petroleum solvents such as paint thinner, or
neutral detergent on the product. They may deform and damage the product.

Do not leave the product in places with hot temperatures such as inside of a car or in
a car trunk in summer. The heat may deform plastic parts of the product, damaging
internal parts and resulting in potential fire or electric shock. If the product is sealed
tight in hot conditions, heated air expanding inside the product may deform the casing
and ruin the waterproofing.

Do not store the product in wet or high humidity place, to avoid mold, rust, corrosion
or malfunction.

Do not store the product with naphthalene or camphor mothballs, or in locations such
as a laboratory where chemicals are used. This environment can cause mold, rust,
corrosion or malfunction.

SEA&SEA SUNPAK Co., Ltd. assumes no liability for compensation of loss of
captured images or expenses caused by loss of images, even if you are unable to
shoot due to a product defect or malfunction.

SEA&SEA SUNPAK Co., Ltd. will not be responsible for the replacement or
compensation for cameras, lenses or those accessories damaged due to your
invalid operation.

SEA&SEA SUNPAK Co., Ltd. assumes no liability for errors or discrepancies in
this manual.

Carefully observe the O-ring maintenance manual for the handling of O-rings
before use.

The silicon grease included in the product package is inedible.