SEA SLIDE DG R2F, Руководство пользователя

Страница: 20 / 32

Insertion of the
optional memory
MEMO
MEMO
CNS
CNS
RADIO TRANSMITTER SELF LEARNING
WITH «RF FIX» RECEIVER ON CONTROL UNIT
!
Connect the receiver on
the CNS connectors,
making sure that the
direction is the
one shown in the
illustration.
WARNING: Make the radio transmitters programming before you connect the antenna and
insert the receiver into the special CNS connector (if available) with turned off control unit. With
the RF FIX module it will be possible to use only radio controls with fixed code.
Select through the display 2-TRANSMITTERS and press OK, now select with the UP and DOWN
buttons, the command to which you want to associate the button (it is possible to associate max. 2
commands) and press OK to confirm the choice, now press the button of the radio transmitter which you
want to associate. If the storage is successful, the display will show
“Stored” . In the 2-TRANSMITTERS
MENU it is possible to select “Start” (to associate a Start command), “Pedestrian start” (to associate a
Pedestrian Start ), “External Module” (For the activation of a contact on the EXP output), “Stop” (To
associate the STOP command to the TX), “Unloch” (to associate the release of the electric brake to the
transmitter), “Delete a transmitters” (To delet the single transmitter only if it is a Rolling Code Plus), “Clear
memory” (To delete all TX), “End” (To exit menu 2-TRANSMITTERS). To release the electric brake it is
necessary to give three consecutive pulses, the 4th will reactivate the lock of the electric brake.
Notes:
- Enter radio transmitters learning only when the working cycle stops and the gate is closed.
- It will be possible to memorize up to max. 16 codes (buttons) adding the MEM memory it will be possible
to store up to 496 different codes.
- You can store max. 2 of the available 4 functions. If the control unit receives a code which was already
associated to another function it will be updated with the new function.
DELETE TRANSMITTERS FROM THE RECEIVER
With modules different from RF FIX, it will be possible to delete only the entire memory of the receiver.
Proceed as follows: select from the menu 2-TRANSMITTERS
: “Clear memory” and hold the OK button
until the display shows the message “OK”.
International registered trademark n. 2.777.971
20