SEA LOOP 2 Скачать руководство пользователя страница 9

67411510

Rev.01 - 05/2013

Sistemi Elettronici

di Apertura Porte e Cancelli

International registered trademark n. 804888

®

GENERAL NOTICE FOR THE INSTALLER AND THE USER 

1. Read carefully these 

Instructions

 before beginning to install the product. Store these instructions for 

future reference
2. Don’t waste product packaging materials and /or circuits.
3. This product was designed and built strictly for the use indicated in this documentation. Any other use, not 
expressly indicated here, could compromise the good condition/operation of the product and/or be a source 
of danger. SEA S.p.A. declines all liability caused by improper use or different use in respect to the intended 
one.
4. The mechanical parts must be comply with Directives: Machine Regulation 2006/42/CE and following 
adjustments), Low Tension (2006/95/CE), electromgnetic Consistency (2004/108/CE) Installation must be 
done respecting Directives: EN12453 and En12445.
5. Do not install the equipment in an explosive atmosphere.
6. SEA S.p.A. is not responsible for failure to observe Good Techniques in the construction of the locking 
elements to motorize, or for any deformation that may occur during use.
7. Before attempting any job on the system, cut out electrical power and disconnect the batteries. Be sure 
that the earthing system is perfectly constructed, and connect it metal parts of the lock.
8. Use of the indicator-light is recommended for every system, as well as a warning sign well-fixed to the 
frame structure.
9. SEA S.p.A. declines all liability as concerns the automated system’s security and efficiency, if components 
used, are not produced by SEA S.p.A..
10. For maintenance, strictly use original parts by SEA.
11. Do not modify in any way the components of the automated system.
12. The installer shall supply all information concerning system’s manual functioning in case of emergency, 
and shall hand over to the user the warnings handbook supplied with the product.
13. Do not allow children or adults to stay near the product while it is operating. The application cannot be 
used by children, by people with reduced physical, mental or sensorial capacity, or by people without 
experience or necessary training. Keep remote controls or other pulse generators away from children, to 
prevent involuntary activation of the system.
14. Transit through the leaves is allowed only when the gate is fully open.
15. The User must not attempt to repair or to take direct action on the system and must solely contact 
qualified SEA personnel or SEA service centers. User can apply only the manual function of emergency.
16. The power cables maximum length between the central engine and motors should not be greater than 10 

2

m. Use cables with 2,5 mm  section. Use double insulation cable (cable sheath) to the immediate vicinity of 
the terminals, in particular for the 230V cable. Keep an adequate distance (at least 2.5 mm in air), between 
the conductors in low voltage (230V) and the conductors in low voltage safety (SELV) or use an appropriate 
sheath that provides extra insulation having a thickness of 1 mm.

 

14

English

Содержание LOOP 2













Отзывы: