GSM-R5-DIN_User_Manual_EN_v1-11.docx
Strana 3 z 7
Caution
When configurating via SMS is important to understand that´s only change of
parameters and it will not match with configuration saved in PC.
7.
Control
7.1
Output control by “ringing”
GSM
rele
5
is set by the manufacturer to switch ON an OUTPUT Y6 for 4 seconds when
any user from the list of users calls to
GSM
rele
5
phone number. This pulse is useful for
an opening of an entry gate. Test this function by a call to
GSM
rele
5
from your mobile
phone (it’s important to send a valid command SMS to
GSM
rele
5
from your mobile
phone if have inserted a “new” SIM card to
GSM
rele
5
).
GSM
rele
5
rejects a call and at the same time generates a pulse on an OUTPUT Y6.
7.2
Remote control of
GSM rele
5
via SMS
GSM
rele
5
is controlled via SMS of the GMS network. Text SMS are in form:
<PASSWORD> <COMMAND> [<COMMAND >]
Password (access code)
Password is a main security item for
GSM
rele
5
control. Command SMS are accepted
from any phone number. It means anybody who knows the password and the phone
number can control the
GSM
rele
5
. The password is a string of digits (1 to 20) which
must be on the beginning of any command SMS. Otherwise the SMS will be ignored. A
text before the password is automatically ignored. It is useful when command SMS are
sent from Internet GSM gates. The password can be changed using SEAConfigurator on
the tab General or by a configuration SMS message.
Default password set up by manufacturer:
1234
Command
This part of a message specifies a requested action. See the following table for available
commands.
GSM
rele
5
commands are not a case sensitive, it’s possible to use upper
letters as well as lower letters.
Each command is preceded by Yx, where x is the number of controlled output. If output
is not specified, the OUTPUT (Y5) is used as default. Commands
ON
and
Y5 ON
and
Y5ON
has the same meaning.
It´s possible to use multiple commands in one message separated by a space.
E.g.
1234 ON
… switch on device connected to output Y5
1234 Y5 ON
… switch on device connected to output Y5
1234 Y6 OFF
… switch off device connected to output Y6
1234 Y6 PULSE 5
… an OUTPUT Y6 will be switched on and then after 5 seconds
will be switched off (Notes: if an output is already switched on, it will be just switched
off after 5 seconds)
1234 Y6 reg 5
… requested temperature for the function temperature regulation
of OUTPUT Y6 will be set to + 5°C
Using multiple commands in one SMS message can look like this:
1234 Y5 OFF Y6 REG 25
… switch off output Y5 and sets temperature regulation
on output Y6 to 25 °C according to temperature sensor on input A3.
Confirmation
If a command message contains a valid password (access code) the
GSM
rele
5
returns
a confirmation message which informs if a command was accepted (see chapter Status
SMS). If you don’t want a confirmation message (e. g. when sending a command SMS
from the Internet GSM gates) add a command “
NOBACK
”.
E.g.
1234 Y5 ON NOBACK
…
GSM
rele
5
will switch on device on output Y5 and
will not send message back.
7.3
Local control of outputs
GSM
rele
5
has 2 push buttons for local control of outputs Y5 a Y6 (see chapter 5.2).
7.4
Status SMS message
Whenever the command SMS contains valid password the
GSM
rele
5
send back Status
message.
Note: if value of parameter
Signal
is ??, -- or== It´s an error.
7.5
Control using CML (for Smart phones)
This application can use smartphones with Android or iOS. Application
makes easier control of
GSM
rele
5
and state monitoring. You can
download this application from Google Play or Apple Store for free, type
into search „
CML SEA
“. After installing the application, make the first
registration, take a photo of the QR code of the device into the “paring code”. The QR
code you find in the
GSM
rele
5
package
.
Command
Parameter
Meaning
Y5 ON
-
Switch on output Y5 (
Y6 ON
switch on output
Y6)
ON
-
If no output is specified, switch on output Y5
Y5 OFF
-
Switch off output Y5 (
Y6 OFF
switch off output
Y6)
OFF
-
If no output is specified, switch off output Y5
Y5 PULSE
Y5 RESET
5
Switch on output Y5 for 5 seconds creating pulse.
Reset output Y5 for 5 seconds.
PULSE
RESET
If no output is specified, create 5 sec pulse on
output Y5
If no output is specified, reset output Y5
REG
0 to 55
Setting of requested temperature and starts
regulation mode. Request of status SMS (state of
inputs, outputs, temperatures, signal quality and
credit).
STATE
-
Request of status SMS (state of inputs, outputs,
temperatures, signal quality and credit).
Command
Meaning
NOBACK
No confirmation SMS will be sent
Example of status SMS message
Meaning
Base station: Y5 ON OK
Command confirmation: Y5 is switched on.
X1=ON
State of input number 1
X2=OFF
State of input number 2
A3=28'C
State of input number 3
A4=5.0V
State of input number 4
Y5=ON
State of output number 1
Y6=OFF
State of output number 2
Power=good
Power state (from battery or power supply)
Battery=100%
State of battery charge
Signal=58%
State of GSM Signal
