Fig. 4
2500 Max Running
150
150
A
A
B
B
B
ENGLISH
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
Fig. 6
Fig. 5
Fig. 3
3310
200
150
385
CORONA S/RP
67410622
Rev 00 - 02/2012
12
Before installing, make sure that the door is perfectly working and that the guide is free of obstacles.
1. CORONA S INSTALLATION
- Connect the aluminium profiles using the two connecting profiles.
- Insert the connecting profile into the aluminium profile for half its length (150 mm) and fix it with the
A
screw. (Fig. 4)
- Repeat for the other two aluminium profiles.
- Insert the two supplied screws (
B
) into the holes of the aluminium profiles (Fig. 4)
- Connect the two ends of the chain using the connecting link and the two provided screws ( Fig. 5).
- Make sure that the chain has been correctly mounted on the pinion of the Corona S body (Fig. 7 - A).
- Place the guide on the stop of the Corona S body and fix it with the special bracket (Fig. 7 - B).
- Mount the front fixation support on the other end of the guide (Fig. 7 - C)
- Slightly tighten the chain with a 10 key ( Fig.6)
IMPORTANT:
Keep well lubricated the chain and the sliding device (Fig. 7 - D).
Note: In Fig.4 a pair of screws are inserted into the loopholes which will be used for fixing the Corona S operator to the ceiling with
the special brackets (See also Fig. 7).
Connecting
Profile
Connecting
Profile
Aluminium
Profile
Aluminium
Profile
Aluminium
Profile