Fig. 21
Fig. 20
Fig. 22
2.8.
Drill a hole into the gate (Fig 20) to be able to attach the front bracket with the supplied bolts being careful to place the operator
perfectly horizontal (Fig 21).
NOTE:
if it is not possible to attach the
front bracket with the bolts,
weld it to the gate (Fig 22),
being careful to protect the
shaft from welding waste.
ALPHA
14
International registered trademark n. 2.777.971
REV 03 - 06/2009
MECHANICAL INSTALLATION
Fig. 23
Mechanical stop in closing
Mechanical stop in opening
INSTALLATION OF POSITIVE STOPS
On request mechanical stop in opening and closing available.
