Sea Tel 6012-71 C-BAND, Руководство по установке

Страница: 27 / 101

Installation 6012-71 Installation Manual
3-9
3.7.3.8. J9 A/B Serial
Computer RJ-45 Serial M&C connection.
3.7.3.9. J10C Modem
RJ-45 Serial M&C connection to Satellite Modem Console Port.
3.7.3.10. J10D OBM
RJ-45 Serial M&C connection to Out of Band Management equipment, if used.
3.7.3.11. J11 Gyro
Gyro SBS or Synchro connections.
3.7.3.12. J13 NMEA 0183
NMEA 0183 I/O connections..
3.7.3.13. J12 Aux 232
Auxiliary wired RS-232 connection.
3.7.3.14. J14 Aux 232
Not connected - -Future development.
3.7.3.15. J15 NMEA 2000
NMEA 2000 I/O connection..
3.7.4.
Connect your other Below Decks Equipment (ie, telephone, fax machine and computer equipment) to
complete your configuration.
Other BDE connections
3.8. Final Checks
3.8.1.
Do a visual inspection of your work to assure that everything is connected properly and all cables/wires are
secured.
Visual/Electrical inspection
3.8.2.
Double check all your connections to assure that it is safe to energize the equipment.
Electrical - Double check wiring connections
3.9. Setup - Media Xchange Point™ (MXP)
Now that you have installed the hardware, you will need to setup, calibrate and commission the antenna.
You may also need to load/update the modem option file, which is not part of the scope of this manual, contact the
airtime provider NOC for guidance.
At the very least, you will need to set up the antenna system for:
•
Connect & configure a ships computer for accessing the MXP.
•
The gyro compass signal being provided by the ship.
•
Check/Set Home Flag.
•
Set up Blockage zone(s) as needed.
•
Set up / configure all satellites that the system might use as the ship travels, even if there is only one. If your
system will be using iDirect OpenAMIP you will not need to create satellite configurations.
•
Acquire the desired satellite.
•
Optimize targeting (Auto or manual trim).
•
Arrange for commissioning & cross-pol isolation testing with the NOC.
•
Conduct cross-pol isolation testing with the NOC.
•
Conduct other commissioning testing with the NOC (ie P1dB compression point).