Sea Ray 320 Sundancer, Руководство пользователя

Страница: 71 / 198

4.9
S
ECTION
4 • B
ILGE
& U
NDERWATER
G
EAR
320 Sundancer
®
(355 Sundancer
®
)
6. E
NGINE
R
EMOVAL
Should the removal of an engine become
necessary,
see your Sea Ray
®
dealer or an
authorized service representative of the engine
manufacturer.
The following is only a generalized
procedure to follow.
Shut off the fuel lines and close the engine
seacocks. Remove all electrical wires, fuel lines and
raw water intake hoses from the engine. Unbolt the
engine coupling from the shaft coupling and slide
the shaft and coupling back from the engine. Detach
both throttle and shift connections. Cap off hoses
to avoid hydraulic fluid loss.
Do not bend or twist
the hoses, as damage may result. Remove the
mounting bolts for the engine and lift the engine
out, leaving the mounts bolted to the stringer caps.
NOTE: EXHAUST HOSE ROUTING MAY BE DIFFERENT THAN THIS
ILLUSTRATION DUE TO BILGE LAYOUT REQUIREMENTS FOR
DIFFERING ENGINE AND EQUIPMENT OPTIONS.
UNDERWATER
EXHAUST OUTLET
(BOTTOM PAINT INSIDE OF OUTLET)
EXHAUST BYPASS
OUTLET
E
XHAUST
S
YSTEM
(W
ITH
V-D
RIVE
E
NGINE
O
PTION
)
(P
ORT
S
IDE
S
HOWN
)
(F
IG
. 4.9.1)
MUFFLER
PORT
STBD
FWD
PORT ENGINE
EXHAUST HOSE
To reinstall, reverse the above procedure. Check
the coupling and shaft alignments, as well as water
hoses and wiring connections. Also check for fuel
and exhaust leaks and make sure seacocks are
open before starting engines.