4
ASSEMBLY
Slide 1 washer over
the axle of the wheel
frame.
Slide the wheel onto
the axle.
Note: Push the red
bearing down if not
fully seated.
With the axle sticking
through the wheel,
place another washer
over the top and lock
into place using one
of the circular lock
pins.
Repeat these steps with the other axle.
Insert one wheel frame
into the opening on
the EZ Cart bar by
pushing in the button
on the frame. Adjust
the length by using
the various pre-drilled
holes spaced across
the bar.
Place the rear of the
boat on top of the
EZ Cart and run one
strap through the eye
bolt on each side of
the cart. Lay the ends
of the strap on top of
the boat.
The EZ Cart is now ready to use.
ATTACHING TO A BOAT/KAYAK
Both straps may be
needed to secure the
boat to the cart.
Link the straps
together. Run the
end of one strap up
through the middle
of the buckle of the
2nd strap, then down
through the front of
the buckle. Repeat
for the other end. Pull
tight.
