Sea-doo 295100679, Руководство пользователя

Страница: 6 / 16

3/9/2017 e­instruction­details
http://instructions.brp.com/content/instruction­sheet/en_CA/e­instruction­details.html#articleNo=kA0a0000000l0rxCAA&lang=en_CA&title=SEA­DOO%20KIT… 6/16
Tightening torque
M6 x 20 Plastite Hexagonal Screw [P7] 7 ± .5 N•m (62 ± 4 lbf•in)
1. Install the depth finder into its support with harness pointing towards center of hull. Squeeze
retaining tabs to ease insertion.
2. Push on the depth finder until both locking tabs are locked.
1. Depth finder
2. Locking tabs locked
(Type ­ C) With glued base
1. Install depth finder support as per following illustrations.
service products
Isopropyl alcohol Clean inside of hull at depth finder support mounting area
5 minute epoxy glue Glue depth finder support to inside of hull
NOTE: In following illustration, some hoses are not shown for clarity of illustration.
TYPICAL ­ HULL PREPARATION
1. Clean hull here
2. Exhaust temperature sensor
3. Bailer assembly
2. Prepare epoxy glue as per manufacturers' instructions.
WARNING
When mixing and applying epoxy glue, always refer to manufacturers instructions.
3. Apply generous amount of epoxy glue to base of depth finder support.