Sea-doo 230 Series Скачать руководство пользователя страница 154 | Manualshive

Страница: 154 / 180

background image

BRP LIMITED WARRANTY FOR MODEL YEAR 2012
SEA-DOO

®

BOATS SOLD IN THE UNITED STATES

AND CANADA

1) SCOPE

BRP US Inc.* (“BRP”) warrants its new and unused Model Year 2012 Sea-Doo

®

Boats (“Boat”) sold by authorized BRP dealers (as hereinafter defined) in the fifty
United States and Canada (“dealer”) from defects in material and workmanship
for the period and under the conditions described below. This limited warranty will
become null and void if: (1) the Boat was used for racing or any other competitive
activity, at any point, even by a previous owner; or (2) the Boat has been altered
or modified in such a way so as to adversely affect its operation, performance or
durability, or has been altered or modified to change its intended use.

All genuine BRP parts and accessories, installed by an authorized BRP dealer at the
time of delivery of the 2012 Sea-Doo

®

Boat, carry the same warranty as that of the

Boat.

2) LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY
AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT THEY CANNOT
BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSE-
QUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS
WARRANTY. SOME STATES/PROVINCES DO NOT ALLOW FOR THE DIS-
CLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A
RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM STATE TO STATE, OR PROVINCE TO PROVINCE.

NEITHER THE DISTRIBUTOR, ANY BRP DEALER NOR ANY OTHER PERSON
HAS BEEN AUTHORIZED TO MAKE ANY AFFIRMATION, REPRESENTA-
TION OR WARRANTY REGARDING THE PRODUCT, OTHER THAN THOSE
CONTAINED IN THIS LIMITED WARRANTY, AND IF MADE, SHALL NOT BE
ENFORCEABLE AGAINST BRP. BRP RESERVES THE RIGHT TO MODIFY THIS
WARRANTY AT ANY TIME, BEING UNDERSTOOD THAT SUCH MODIFICA-
TION WILL NOT ALTER THE WARRANTY CONDITIONS APPLICABLE TO THE
PRODUCTS SOLD WHILE THIS WARRANTY IS IN EFFECT.

3) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under any circumstances:

– Normal wear and tear;
– Routine maintenance items, tune-ups, adjustments;
– Damage caused by failure to provide proper maintenance and/or storage, as de-

scribed in the Operator's Guide;

– Damage resulting from removal of parts, improper repairs, service, mainte-

nance, modifications or use of parts not manufactured or approved by BRP or
resulting from repairs done by a person that is not an authorized servicing BRP
dealer;

152

______________

«
...
152
153
154
155
156
...
»

Содержание 230 Series





















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 230 Series

Бренд: Advanced Elements Страницы: 20

Cross 57 Bow Rider

Бренд: YAMARIN Страницы: 51

SHADOW 500 2021-2022

Бренд: BRABUS Страницы: 121

Бренд: AB Inflatables Страницы: 52

Бренд: Grady-White Boats Страницы: 78

Бренд: Grady-White Boats Страницы: 82

Бренд: Grady-White Страницы: 112

Бренд: CORRECT CRAFT Страницы: 188

Бренд: CORRECT CRAFT Страницы: 192

Бренд: Palfinger Страницы: 259

RESPONSE TXi 2021

Бренд: Malibu Boats Страницы: 202

Бренд: Tayana Страницы: 112

Бренд: GALA Страницы: 12

Бренд: BRIG Страницы: 8

SWIFT TRAWLER 47

Бренд: BENETEAU Страницы: 252

Бренд: Yamaha Страницы: 156

Бренд: Carolina Cat Страницы: 65

Бренд: Aventura Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды