Sea-doo 2006 3D RFI Скачать руководство пользователя | Manualshive

Страница: 113 / 120

background image

BRP INTERNATIONAL LIMITED WARRANTY: 2006
SEA-DOO

®

3D

TM

DI PERSONAL WATERCRAFT

1. SCOPE

Bombardier Recreational Products Inc. (“BRP”) warrants its model-year 2006
Sea-Doo 3D DI personal watercraft from defects in material or workmanship for
the period described below.

All genuine BRP parts and accessories, installed by an authorized BRP distribu-
tor/dealer (as hereinafter defined) at the time of delivery of the Sea-Doo personal
watercraft, carry the same warranty as that of the personal watercraft.

Use of the product for racing or any other competitive activity, at any point, even
by a prior owner will render this warranty null and void.

2. WARRANTY COVERAGE DURATION

This warranty will be in effect from the date of delivery to the first retail consumer
or the date the product is first put into use, whichever occurs first and for a period
of:
a)

TWELVE (12) CONSECUTIVE MONTHS, for private, recreational use.

b)

FOUR (4) CONSECUTIVE MONTHS, for commercial use. A personal wa-
tercraft is used commercially when it is used in connection with generating
income or any work or employment during any part of the warranty period. A
personal watercraft is also used commercially when, at any point during the
warranty period, it has commercial tags or is licensed for commercial use.

The repair or replacement of parts or the performance of service under this war-
ranty does not extend the life of this warranty beyond its original expiration date.

3. CONDITIONS TO HAVE WARRANTY COVERAGE

This warranty coverage is available only on Sea-Doo personal watercraft pur-
chased as new and unused by its first owner from a BRP distributor/dealer au-
thorized to distribute Sea-Doo products in the country in which the sale occurred
(“BRP distributor/dealer”), and then only after the BRP specified pre-delivery in-
spection process is completed and documented.

Warranty coverage only becomes available upon proper registration of the prod-
uct by a BRP distributor/dealer. Such limitations are necessary in order to allow
BRP to preserve the safety of its products, consumers and the general public.

Routine maintenance outlined in the Operator’s Guide must be timely performed
in order to maintain warranty coverage. BRP reserves the right to make warranty
coverage contingent upon proof of proper maintenance.

4. WHAT TO DO TO OBTAIN WARRANTY COVERAGE

The customer must notify a servicing BRP distributor/dealer within two (2) days
of the appearance of a defect, and provide it with reasonable access to the prod-
uct and reasonable opportunity to repair it. The customer must also present to
the BRP distributor/dealer, proof of purchase of the product and must sign the
repair/work order prior to the start of the repair in order to validate the warran-
ty repair. All parts replaced under this limited warranty become the property of
BRP.

_____________________

111

«
...
111
112
113
114
115
...
»

Содержание 2006 3D RFI

























































































































Отзывы:

Нет отзывов

Похожие инструкции для 2006 3D RFI

1989 2150 Cuddy Outboard

Бренд: PURSUIT Страницы: 36

Бренд: MACGREGOR Страницы: 7

CASCADE BT-21CAP

Бренд: Aqua-Marina Страницы: 68

WAVEBREAK KAYAK 1426289

Бренд: Bestway Страницы: 12

Бренд: Sea-doo Страницы: 118

Бренд: Everglades Страницы: 126

Бренд: S/C Yachts Страницы: 10

Бренд: Sailfish Страницы: 41

Бренд: Cobalt Digital Inc Страницы: 64

Бренд: Yamaha Страницы: 102

273 CUDDY CABIN

Бренд: Cobalt Digital Inc Страницы: 136

BASS RAIDER 10E

Бренд: Pelican Страницы: 3

Бренд: PURSUIT Страницы: 151

Бренд: Williams Страницы: 15

Бренд: PURSUIT Страницы: 102

Бренд: PURSUIT Страницы: 116

Бренд: PURSUIT Страницы: 120

Бренд: PURSUIT Страницы: 118

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды