Sea-doo 1997 GSI, Руководство по ремонту

Страница: 329 / 372

Section 12 TECHNICAL DATA
Sub-Section 04 (GTS MODEL)
12-04-5
TIGHTENING TORQUES GTS (5818)
EN
GINE
Exhaust manifold screws 24 N•m (17 lbf•ft) (4)
Magneto flywheel nut 145 N•m (107 lbf•ft) (1)
Flywheel (PTO side) 110 N•m (81 lbf•ft) (5)
Crankcase screws M8 24 N•m (17 lbf•ft) (3) (4)
M10 40 N•m (30 lbf•ft) (3) (4)
Crankcase/engine support nuts 35 N•m (26 lbf•ft) (1)
Engine support/hull 25 N•m (18 lbf•ft) (1)
Cylinder head screws 24 N•m (17 lbf•ft) (1) (4)
Crankcase/cylinder screws 24 N•m (17 lbf•ft) (1) (4)
Tuned pipe nut 25 N•m (18 lbf•ft) (1)
Tuned pipe fixation screws 25 N•m (18 lbf•ft) (1)
Flame arrester screws 10 N•m (88 lbf• in ) (1)
Magneto housing cover screws 9 N•m (80 lbf• in ) (5)
Starter mounting screws 22 N•m (16 lbf•ft) (1)
Starter lock nuts 7 N•m (62 lbf•
in
)
Spark plugs 24 N•m (17 lbf•ft) (5)
JE
T PUMP
Impeller 70 N•m (52 lbf•ft) (2)
Pump/hull nuts 33 N•m (24 lbf•ft) (1)
Venturi/pump housing screws 21 N•m (16 lbf•ft) (1)
Nozzle/venturi screws 20 N•m (15 lbf•ft) (1)
Pump housing cover screws 4 N•m (35 lbf• in ) (1)
Inlet grate screws 8 N•m (71 lbf• in ) (1)
Riding plate screws 10 N•m (88 lbf• in ) (1)
STEERI
N
G
Steering cable jam nuts 10 N•m (88 lbf• in )
Steering support/collar screws 15 N•m (11 lbf•ft) (1)
Steering stem screw 40 N•m (30 lbf•ft) (2)
Handlebar nuts 26 N•m (19 lbf•ft)
Reverse gate screws 20 N•m (15 lbf•ft) (1)
Steering cable ball joint (nozzle) 2 N•m (18 lbf• in )
Reverse cable ball joint nut 7 N•m 62 lbf• in )
ADDITIONAL INFORMATION: apply where indicated; (1) Loctite 242 (blue)
(2) Loctite 271 (red)
(3) Loctite 515
(4) Synthetic grease
(5) Anti-seize lubricant
;
WARNING: Correct torques and use of Loctite must be strictly followed.
www.SeaDooManuals.net