Sea-Bird Scientific SUNA V2, Руководство пользователя

Страница: 32 / 54

$ Stops the sensor data collection.
Measure N The sensor gets "n" light data frames. If "n" is zero, the sensor gets one dark data frame.
Timed N The sensor gets light data frames for "n" seconds.
CTD The sensor sends CTD data to be corrected for temperature and salinity. The sensor must be set up to do the
correction and to process it.
Status Print the status of the sensor.
Sleep The sensor goes to low power standby mode.
Data files are saved in "FULL_ASCII."
Note: "Polled" and "Logger-controlled" are both terms for the same mode of operation.
7.1.4 Periodic operation
Use the software to see and change the settings for this mode of operation.
1. Select a "Sample Interval" from the drop-down menu.
2. Look at the "Offset" value. An offset value of 300 (5 min) changes the start time by
five minutes, for example, from 06:00 to 06:05.
3. The "Light Frames" value is 0–255 .
Data is collected for either a user-selected quantity of time or a user-selected number of
measurements.
Note: "Periodic" and "Autonomous" are both terms for the same mode of operation.
7.1.5 Data acquisition monitor
The software monitors the data collected by the sensor and shows any errors in this
window. The error counters are reset each time the sensor starts a new data collection
file. All information is transmitted during data collection, in real-time.
To see this tab, go to the
View menu and select Acquisition Monitor .
Reference
30