E-11
CAUTION
z
Before mounting the camera in the
housing, make sure the O-ring is not
sticking out of its groove.
z
Make sure to remove the eyecup
from the camera. If used with the
eyecup in place, it could cause
flooding.
1
Rotate the quick lock in the
OPEN direction, and then
remove the quick shoe from the
front case
2
Using the included attachment
tool, fix the quick shoe to the
camera’s tripod socket
3
Attach the lens to the camera,
and then set the focus mode (AF
or MF)
4
Make sure the quick lock is in
the OPEN position
5
Slide the camera forward into
the front case
z
Move the sync connector clear of the
front case.
z
To make sure that the gear attached
to the lens and the gear on the front
case do not hit each other, rotate the
focus / zoom dial while sliding the
camera into place.
Mounting the Camera in the Housing
