E-10
1
Set the port lock on the bottom
of the front case to the OPEN
position
2
Align the positioning mark on
the front case with the OPEN
mark on the port, insert the port
into the front case, and then
rotate the port in a clockwise
direction until it stops
CAUTION
Before attaching the port, make sure
there are no specks of dust, scratches,
or deformities on the O-ring and the O-
ring contact surfaces.
3
Make sure that the positioning
mark on the front case and the
LOCK mark on the port are
aligned
4
Press the port lock in the LOCK
direction until you hear the
sound of it clicking into place
z
Make sure that the port lock pin is
engaged with the notch in the port.
Detaching the port
1
Set the port lock to the OPEN position
2
Hold the front case firmly and rotate the port in a counterclockwise
direction
CAUTION
z
Do not attempt to remove the port with the port lock in the LOCK position.
Doing so could damage the camera base.
z
If using NX-90PRO ports (with 4-digit part numbers and black bayonets)
with this model, it is necessary to modify the port’s bayonet. NX-90PRO
ports with 5-digit part numbers and gray bayonets can be used as is. For
details, please contact SEA&SEA or a SEA&SEA authorized dealer.
Attaching and Detaching the Port
OPEN
LOCK
OPEN
LOCK
Port lock pin
