SE Electronics RNT, Руководство пользователя

Страница: 4 / 40

4
Safety and maintenance
Risk of damage
Please make sure that the piece of equipment to which your microphone
and PSU will be connected fulfils the safety regulations enforced in your
country and is fitted with a ground lead.
Cleaning the microphone
After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a
zipper pouch.
Technical Specifications
Capsule Hand-crafted 1" diaphragm true condenser capsule
Polar patterns 9 (omni, cardioid, figure-8 with three additional steps between each)
Tube complement 1x 12AU7 (ECC82)
Frequency range 20 – 20,000 Hz
Sensitivity 16 mV/Pa (-36 dBV)
Gain -12 / 0 / +12 dB, switchable
Max. SPL (0.5% THD) 151 dB
SPL
Equivalent noise level 18 dB(A)
Dynamic range 133 dB
Signal-to-noise ratio 76 dB
Low cut filter 40 / 80 Hz, 12 dB/Oct, switchable
Electrical impedance (floor box output) 30 Ohms
Recommended load impedance >2k Ohms
Connectivity 3-pin male XLR connector
Power requirement Floor Box / PSU (included)
Dimensions
Microphone
Diameter 62 mm (2.44 in.) Length 240 mm (9.45 in.)
Floor Box / PSU
356 x 135 x 100 mm (14.02 x 5.31 x 3.94 in.)
Weight
Microphone
989 g (34.90 oz.)
Floor Box / PSU
3905 g (137.79 oz.)