SHEVTEC PSU PANEL
Technical information and operating instructions
10
61
1
v4
0
9.1
9
+44 (0)1543 443060
www.secontrols.com
Please keep these operating instructions for future reference and maintenance.
Subject to technical modifications. Diagram is not binding.
Introduction:
The SE Controls range of
control systems are built
and tested control panels
specifically for Smoke and/
or Environmental Ventilation
Systems and for use with SE
Controls supplied equipment.
They must not be used for any other
application or in conjunction with
other manufacturers’ products without
prior consultation with SE Controls.
Application:
The SHEVTEC PSU Panel is a
powerful 24 Volt DC control
system designed for 2-wire
24V DC actuators in a smoke
control and/or environmental
ventilation system.
Operating from a 230VAC supply,
the SHEVTEC PSU Panel can deliver
up to 30/60/90 Amps to drive
24 Volt motorised actuators.
The SHEVTEC PSU Panel can be
mounted in a centralised plant
room location. Each SHEVTEC PSU
Panel can operate independently
or be linked to others to produce
a networked control system. The
networked control system in turn
can operate standalone or be linked
to a building management system.
Installation of this equipment must
only be carried out by competent
and qualified persons.
The Installer and user are requested
to read, understand and retain
this information pack with the
panel for future reference.
This information pack must be
retained for future reference by
the client and be made available
for reference by persons installing,
servicing or modifying the panel.
