+44 (0)1543 443060
www.secontrols.com
Please keep these operating instructions for future reference and maintenance.
Subject to technical modifications. Diagram is not binding.
3
Important Notices
• Failure to install the
device in accordance
with the manufacturer’s
instructions will invalidate
any warranties.
• Failure to follow current
electrical regulations
governing the installation
of fixed equipment can
lead to prosecution
and may invalidate
any warranties.
• Unless otherwise
indicated, you must not
adjust or remove existing
manufacturers cabling or
use terminal outputs or
inputs for purposes other
than their design without
written authorization
from SE Controls.
• Consumable items e.g.
fuse & batteries where
replacement is needed
must be replaced with
parts of equivalent
manufacturing standard/
compliance and rating.
SE Controls accepts no
liability for failure to
comply with the above
statements or the
installation and operation
guidance in the following
sections of this guide
and reserves the right to
invalidate the warranty
of the controller
SE Controls reserves
the right to introduce
any modifications
and improvements to
the contents of this
publication without
the obligation of
giving prior notice.
• This equipment has no
mains on/off switch and is
intended for permanent
connection only.
• Do NOT allow abuse or
mishandling of the device.
• Do NOT adjust or
alter the device or its
enclosure including
labelling/marking.
• Do NOT use this controller
for any other purpose
other than that intended
by the manufacturer.
• Do NOT allow installation
of this equipment
by persons not
electrically qualified.
• Damage to the equipment
due to failure to test
the electrical integrity
of external wiring will
invalidate any warranties.
