SE Audiotechnik I-Line Series, Инструкция по эксплуатации, Страница: 7 / 27

IA 202D / IA 402D Instruction Manual
Revision 3 7
2.2. Technical Specifications
Parameter / Value IA 202D IA 402D
Type Class-D, SMPS
Power Output 2 x 250W @ 8 Ω
2 x 125W @ 16 Ω
2 x 400W @ 4 Ω
2 x 200W @ 8 Ω
2 x 100W @ 16 Ω
Minimum Load Impedance 8 Ω 4 Ω
Input Impedance 20 kΩ balanced, 10 kΩ unbalanced
SNR (At rated power) 95 dB
Crosstalk 64 dB 62 dB
DSP 48 kHz, 24-bit DSP processor, processing latency: 1.1 ms
Signal Processing Speaker presets, Delay, High-Shelf, Low-Shelf, High-Pass, Low-Pass,
Parametric Equalizer, RMS Limiter, Peak Limiter, Phase Invert, Mute,
Output Gain
Controls Digital encoder with push button
Maximum Input Level +20dBu
Signal Connectors XLR 3-pin male line-level inputs/link outputs,
Phoenix Contact MSTB 3-pin inputs/link outputs
Speaker Connectors Neutrik SpeakON® NL4 outputs, Phoenix Contact MSTB 4-pin outputs
Protection short-circuit, over-heating, over-current
Cooling Sensor controlled fan, front-to-back air flow
Power Efficiency 76% 83 %
Power Consumption (Idle, Full
Power)
29 W / 600 W 30 W / 1000 W
Power Requirements 100 – 120 VAC 50/60 Hz
220 - 240 VAC 50/60 Hz
Dimensions (W x H x D) 483 x 66 x 256 mm / 1.5 HU
Weight 4.7 kg (netto) 5.1 kg (netto)
*All product specifications in this document are subject to change without notice.