SE Audiotechnik I-Line Series, Инструкция по эксплуатации, Страница: 15 / 27

IA 202D / IA 402D Instruction Manual
Revision 3 15
The names of the presets are organized in such a way that first five symbols would
always represent loudspeaker model for which the preset is made. This is due to the safety
reason so that user always knows if his user preset has the right factory settings.
Factory presets are each speaker systems default configuration with factory pre-
defined filter & limiter settings layer. User presets are being built on top of factory presets by
saving additional user adjustment layer containing:
•
User HP filter settings
•
User EQ settings
•
User Delay settings
6.3.3.1.1. Preset Loading
To load a preset scroll to the chosen preset and click the rotary controller. A dialogue
is displayed on the screen to either load preset, save preset or go back. Saving is only available
in user preset area to save user presets.
By pressing Load Preset the preset is loaded in the DSP and “Preset Loaded!” is
displayed shortly on the screen.
To return choose Back and click the rotary controller.
Figure 10. Preset Loading.
6.3.3.1.2. Preset Saving
To save a preset choose one of the existing or empty user preset locations and click
the rotary controller. A dialogue similar to factory preset loading is displayed on the screen,
only in this case an additional option is available to save the preset.
Figure 11. Preset Loading & Saving.
By click on Save Preset a dialogue to enter preset name is displayed.
Here user can edit last 9 symbols to write a note or name for the user preset. To edit
the name click on the name with rotary controller. Character selection is done by scrolling the
controller and choosing the letter by clicking. Character deletion is performed by choosing
the
“
←
” symbol and clicking. To complete the editing of the name choose space symbol and
click twice.
To confirm preset saving choose Save and click the rotary controller. Saving is
confirmed with a display on the screen “Preset Saved!”
FACTORY PRESET
IC 34: DEFAULT
Back
> Load Preset
USER PRESET
EMPTY: USER 1
Back
Load Preset
> Save Preset