SE Audiotechnik CV 212, Руководство пользователя

Страница: 8 / 13

中文
EN
D
U-BR
ACKET A
CCES
SOR
Y
15 14
Figure 9. CV 212 mounted over one or even two subwoofers ,
as the top unit of systems with low-frequency extension.
Do not place the CV 212 over a stack of more than two subwoofers.
In order to increase the safety of the system, it is highly recommended to:
- Use ratchet straps to tie together the CV 212 and the subwoofer/s.
- Fix the CV 212 position in the topmost subwoofer using a 5 cm adapter bolt with
M20 thread.
Using the CV 212 UB U-bracket, the CV 212 can be hanged from the ceiling or a truss structure, for
permanent installations. Sold separately from the CV 212 , this item also includes:
- 2x M10 handle screws
- 2x Steel washers
- 2x Silicone washers
MOUNTING
To attach the U-bracket to the CV 212 cabinet, it is recommended to have assistance to perform the
following steps:
1. Identify the correct fly points, located below the plastic handle on each side.
Remove their black countersink screws.
2. Onto the thread of each M10 handle screw, insert a steel washer.
3. With additional help, place the U-bracket on its position by aligning the holes at the extremes of its
arms with the holes of the fly points in the cabinet.
4. On each side: insert the handle screw in the hole of the U-bracket, put a silicon washer on the screw
and finally, tight partially the screw in the M10 thread.
U-BRACKET ACCESSORY
Figure 10. Additional elements for CV 212 UB attachment.