中文
EN
D
APPLICA
TIONS
33
32
APPLICATIONS
The B-Line was developed as a family of general purpose subwoofers to provide freedom and versatility
when deploying full-range systems. Thanks to their flexibility, many different configurations can be
implemented, both with other SE AUDIOTECHNIK
®
and with third-party products.
It is always recommended to simulate the system to use, in order to predict in advance its
behaviour under the expected and needed conditions.
In addition, measurements of the system should be performed once installed, to define
properly the crossover frequency between subwoofers and top units, and optimise the
final response in the given environment.
STACKING SYSTEM
B 15A
,
B 15
and
B 18
subwoofers can be safely and easily piled thanks to their two-point stacking system.
It includes the following elements:
-
Top holes and bottom rubber feet: included to indicate the correct position, assuring a firm grip and
a stable position.
-
Side locking points: male lever on the top of the cabinet and the female receptacle on the bottom.
These must be manipulated as shown below:
1. Pull the handle to release the blocking piece.
2. Move the lever upwards to the receptacle of the unit above.
3. Release the handle to close the mechanism. Try to move the lever downwards to verify a close
and safe link.
For the sake of stability and thus safety, maximum three B-Line subwoofers can be stacked
together. Do not exceed these mechanical limits.
Stack
2
1
Snap
3
Figure 34.
Linking system for stacks of
B 15A
,
B 15
and
B 18
subwoofers.
