SDT Sherlog Kit Master SDT270, Техническое и инструкция по эксплуатации для пользователя

Страница: 37 / 61

File name: MAN.MAS.EN‐‐02X‐‐Sherlog‐Master‐user‐manual‐Eng.docx
37/60
15 The Class required hatch cover
ultrasonic tightness test
This chapter describes a complete survey procedure.
15.1 Checking the date and time
Step Screen ( Icon / Text mode) Key Action
1 Switch on the SDT270 receiver
2
Enter the Sherlog Mode:

Select / Sherlog

Press the enter key.
3 Enter the settings menu

Select / Settings

Press the enter key.
4 Enter the date and time settings.

Select / Time/Date

Press the enter key.
5 Check and/or set date and time to the local date and time (LT)

Use arrow up and down keys to change to values

Use arrow left and right keys to move to the next position.

Press enter key to confirm and leave this screen.
15.2 Positioning the SDT 8 MS transmitter
The multi‐transmitter should be placed according to paragraph 12.2 Working position.
15.3 Starting a survey procedure
Note: Prior to starting a new survey, ensure that all settings are adjusted to the specific survey and personal
requirements.
15.3.1 Entering the survey information data
Proceed as follows:
Step Screen ( Icon / Text mode) Key Action
1 Switch on the SDT270 receiver
2
Enter the Sherlog Mode:

Select / Sherlog

Press the enter key.
3 Start a new hatch cover test procedure:

Select / Start new survey

Press the enter key.