
5/22
Ref. GPAO : 33502017201_1_1
Fig. 2.2 – Description of the LEDs
A lit LED indicates:
c
Module being supplied
(green, lights up and remains lit)
d
Emergency stop activated (control panel or external emergency stop) (red, lights up and remains lit)
e
Visualisation of starting phase and speed/voltage stabilisation (flashing) and generating set operating OK or set ready to
generate (green, lights up and remains lit)
f
General alarm (orange, flashing)
g
General fault (red, flashing).
2.1.2
Introduction to pictograms
The pictograms are as follows:
Operating temperature
Fuel
Overspeed
Non-starting fault
Starting on external command
Preheating
Air intake
Oil pressure
Battery
Delay
Fig. 2.3 – View of pictograms
¾
The "fuel level" pictogram is used to display the fault, the alarm and the fuel level.
¾
The "operating temperature" and "oil pressure" pictograms are used to display the fault and analog value
¾
The "overspeed" and "non-starting fault" pictograms are used to display the fault.
¾
The "battery" pictogram is used to display the "alternator charge" fault and to indicate the battery voltage.
1
2
3
4
5
Symbols for electric and
mechanical sizes