SDM TRIAX 100, Инструкция по эксплуатации

Страница: 9 / 12

17
In DATA mode, you can recall timing and pace data for
saved runs.
The SDM Triax 100 watch has a 100 lap memory.
SELECT A RUN
Press STOP.
The run number and date of the run are displayed.
VIEW DATA POINTS
Press START/LAP repeatedly.
The following information is displayed:
• Total accumulated distance while running in RUN, GRAPH or CHRON
mode
• Date of run, run #, total run distance
• Lap and split times and distance at each lap count
• Maximum and average speed for each run
• Best lap time and average lap time
ERASE DATA FOR AN INDIVIDUAL RUN
The chronograph must be stopped to erase data.
Press the STOP button to select the run that you want to erase.
Press and hold ADJUST/EXIT. “HOLD to CLEAR” flashes and you will hear
a confirmation tone to indicate that the data for the selected run has
been deleted.
Note: When you delete a run, the next run takes its place. For example, if you delete
RUN 3 from memory, RUN 4 replaces RUN 3. If DATA memory becomes full during a
run, delete that run and begin a new run.
ERASE ALL DATA
Press and hold ADJUST/EXIT button for an additional 4 seconds after
erasing an individual run.
You will hear a continuous tone. “HOLD to CLEAR ALL” flashes in the
display. After 7 seconds, [-- --] indicates that all data has been erased.
S
T
A
R
T
/L
A
P
A
D
JU
S
T / E
XIT
M
O
D
E
/
N
E
X
T
ST
O
P
H20
R ES
IST 1
00M
DATA MODE
16
RESET CHRONOGRAPH
You can reset the chronograph without saving any
data. The chronograph must be stopped to reset. If
the chronograph is running, press STOP.
Press and hold ADJUST/EXIT for 2 seconds. “HOLD
to CLEAR” is displayed. The chronograph resets.
SWITCH THE PRIMARY DISPLAY BETWEEN
LAP, SPLIT AND DISTANCE
Follow directions in Making Adjustments to Mode
Settings to adjust the chronograph display. The
chronograph must be stopped and reset to adjust
the display.
AUTO LAP COUNT
When activated, the Auto Lap Count feature will
automatically mark lap completion when you have
covered a distance which you determine. For
example, if you activate the auto lap feature and
set the lap distance at .4 KM (400 meters), your
watch will automatically mark lap completion every
400 meters.
Follow directions in Making Adjustments to Mode
Settings to activate the auto lap feature and set
the lap distance.
This revolutionary feature lets you monitor splits
on an unmarked course!
SELECT UNITS
You can select to display speed and distance data using Miles or
Kilometers.
Follow directions in Making Adjustments to Mode Settings to select the
units.
RESET
WITHOUT SAVE
Press and hold ADJUST/EXIT to
reset without saving any data.
T
X
E
N
/
E
D
O
M
S
T
O
P
S
T
A
R
T
/
L
A
P
T I
X
E
/
T
S
U
J
D
A
S
T A
R
T
/L
A
P
A
D
JU
S T
/ E
XIT
M
O
D
E
/
N
E
X
T
ST
O
P
H20 RESIST 1
00M
RESET
WITH SAVE
Press and hold STOP to reset
and save run data.
T
X
E
N
/
E
D
O
M
S
T
O
P
S
T
A
R
T
/
L
A
P
T
I
X
E
/
T
S
U
J
D
A
S
T
A
R
T
/L
A
P
A
D
JU
S T
/ E
XIT
M
O
D
E
/
N
E
X
T
ST
O
P
H20 RESIST 1
00M
9328.2- SDM-ENG 6/13/00 5:51 PM Page 16