SDI DA-1G, Руководство по эксплуатации, Страница: 10 / 15

5.0 Installation
Page 6
The instrument may be mounted in a standard 19-inch instrument rack or may be operated
on a laboratory bench.
Connecting Power
The DA-1G ships with a standard North American, European, or Chinese IEC power cord.
Locate the AC POWER entry module on the rear of the enclosure and connect the power
cord.
The amplifier units that are acquired with the DC operation option are shipped with a DC
connector, part number RM12BPE-6S(81), you may prepare a DC power cable with this
connector following the connector configuration on page 2.
If you opted to prepare the DC power cable you may locate the DC input connector on the
rear of the enclosure and connect the cable.