3
SDE Lighting –
www.sdelighting.com
– Sixty Scan
4. OPERATING FEATURES
Menu
When you first power up the fixture
rSt
will display as the fixture goes
through a self-test mode. Pressing the MENU button changes through the
various Menu options. Up and Down is used to change the options within the
separate menu settings.
Master/Slave
The master/slave operation enables several fixtures to be synchronized and
controlled by one master device.
1.) Use standard DMX cables to daisy chain your units together via the DMX
connector on the rear of the units
2.) Choose a unit to function as the Master. Select
d-1-
for sound active,
d-2-
for slow room scan,
d-3-
for use with a remote (sold separately). The
master unit must be the first unit. Finally, chain the units together using
DMX cable.
3.) Select slave units by using the
<UP>/<DOWN>
keys to reach
S-1-
in
the Slave menu for identical movement,
S-2-
for reverse pan,
S-3-
for
reverse pan and tilt,
S-4-
for reverse tilt, and they will react with the
Master.
DMX Mode:
The Sixty Scan will automatically detect whether DMX 512 data is received.
If the data is received the display will show
A.001
If there is no data it will
show
A001
1.) DMX mode appears as
A001
on the LED Readout. Use the
<UP>
and
<DOWN>
buttons to choose a channel between
A001
and
A512
.
Fixtures with the same DMX channel will operate similarly.
MENU
DMX Address
A001
Slave Mode
S-1-
Master Mode
d-1-
Pan Mode
P--1
Tilt Mode
t--1
LED Display
d--1
UP
DOWN
