SD Biosensor STANDARD F2400 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 60

SD Biosensor STANDARD F2400 Скачать руководство пользователя страница 13

13

Precautions before perform a test

Note

·

Read and follow the instructions carefully in the user manual
and Instructions for use of the test device and control. It is
very important to follow the instructions in order to prevent an
inaccurate result or improper treatment.

·

Be sure to check with your distributor and SD Biosensor for the
most up-to-date software and to update before use.

·

Fatal consequences, such as fire or serious system damage,
may occur when the system is installed at an inappropriate
location, since the Analyzer cannot be replaced or removed
from power supply.

·

The Analyzer must be installed in such a way that easy access
to power supply and power switch is ensured.

Specimens

The STANDARD F2400 Analyzer should be only used the specific test devices for
the analyzer. Because specimens are quite different for each parameter, follow
the instructions from the each test device instructions.

Safety Information

There is a potential risk of infection. Professional medical personnel should
always wear gloves when handling patient samples with the STANDARD F2400
Analyzer and test device. It is recommended that you follow all other locally
applicable health and safety regulations.

«
...
11
12
13
14
15
...
»

Содержание STANDARD F2400





























































Отзывы:

Нет отзывов