VECTRA X3 - Page 5
VLT
Valet mode function sets and resets the security system valet mode.
* this function is enabled only when the security system is disarmed
Set or reset the Valet mode:
1. Press and hold Button 6 until the display shows VLT.
· The transmitter will beep six times.
2. Release Button 5.
· The LCD panel will play a tone if the Valet mode was set “V" will be displayed indicating
that the system is in Valet mode.
· The transmitter will beep twice if the Valet mode was reset. “V" will turn off
indicating that the security system is out of Valet mode.
System Armed
System Disarmed Warn Away
Trunk Release
Indicates the alarm is Indicates the alarm is Indicates the warn Indicates the trunk
ON. OFF. away has been triggered. or auxilliary function
has been activated.
Door Open Shock Sensor Battery Low Trunk Open
Indicates the door zone Indicates the shock Indicates the battery Indicates the trunk or
has been triggered. sensor has been inside the transmitter hood zone has been
triggered. needs to be replaced. triggerd.
Alarm clock Valet Mode Panic
Indicates the Indicates the system Indicates the panic
progammable timer has been placed in mode has been
has been set. valet mode. triggered.
