Scytek electronic Vectra X3 Скачать руководство пользователя страница 8

Страница: 8 / 28

Page 4 - VECTRA X3

LCD Backlight

Transmitter Button 5 is used for confirmation, transmitter programming, as well as activation of

the LCD backlighting for use in the dark. Press button 5 to activate the LCD backlight.

System Confirmation

The 2-way transmitter's confirmation feature allows the current vehicle status to be displayed

at any time.

To display system status:

1. Press and hold Button 5 until the display shows CON.

· The transmitter will beep once.

2. Release Button 5.

· The transmitter will beep once.

· The icon representing the system’s current status will be displayed on the LCD panel.

Transmitter Programming

Pressing and holding transmitter button 5 will scroll through several transmitter programmable

options that may or may not be available depending on the model of system installed

DEG

(degress)

Not applicable on this model.

CHP

Sets the siren confirmation chirps ON or OFF:

1. Press and hold Button 5 until the display shows CHP.

·The transmitter will beep 3 times.

2. Release Button 5.

· The transmitter will beep once.

· The LCD panel will show a siren if the chirps are enabled or "off" if the chirps are

disabled.

SND

Sound function allows disabling of the transmitter's confirmation tones.

To turn the transmitter confirmation tones on or off:

1. Press and hold Button 5 until the display shows SND.

· The transmitter will beep four times.

2. Release Button 5.

· The transmitter will beep once.

· The LCD panel will beep five times if enabled or vibrate and display “off” if the

confirmation tones are disabled.

PSV

Passive function allows the passive arming mode to be enabled oe disabled with the

transmitter.

Note: This feature may not be available on all systems.

To enable or disable the passive arming mode:

1. Press and hold Button 5 until the display shows PSV.

· The transmitter will beep five times.

2. Release Button 5.

· The transmitter will beep once and the system will begin the passive arm mode

· The LCD panel will display “off” and vibrate twice if disabled.

Содержание Vectra X3





























Результаты поиска

Содержание Vectra X3

Отзывы:

Похожие инструкции для Vectra X3

Бренды по названию

Популярные бренды

Scytek electronic Vectra X3, Руководство по эксплуатации продукта

Результаты поиска

Содержание Vectra X3

Отзывы:

Похожие инструкции для Vectra X3

Бренды по названию

Популярные бренды