Scytek electronic SkyTrak-3000, Руководство по эксплуатации продукта

Страница: 14 / 20

System Alerts
1. Geo Fence Alert setup:
Type in the address of the Geo Fence window and the boundary size, chose if
alert is for antry into or exit from the boundaries.
Select the Geo Fence Alert.
2. Time Fence Alert:
Set the time alert window, when alert is on, if the vehicle ignition is turned on
within the time window an alert will be set.
3. Speed Alert:
Select the speed threshold, when the alert is set, if the vehicle speed exeeds the
set speed Alert is set.
4. SMS Alert:
SMS alert sends all alerts as a text message to the preset SMS and Email
addresses specified in the vehicle setup window, note: that multiple Emails and
text messages are allowed.
5. Input Alerts:
There are four alert inputs that can be selected.
Inputs 1 2, and 3 are negative (ground).
Input 4 is Positive (12V), this input when the Skytrak system is connected to
ScyTek Galaxy Security System is automatically reports an Alarm Alert.
In stand-alone mode an alert will be set only if the input is valid for
over 5 seconds. connect this input to the siren of vehicle alarm.
After completion of alert setup, Press the save button on the bottom of the screen
to save the setup in the remote unit.
The Success responce indicates the unit received the alert setup.
Renaming input alerts
SkyTrak 3000- Page 10