G 40RS - Page 7
Jumper Selection
Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the parking
light polarity jumper will be visible next to the parking light relay. Set the jumper for the correct polarity
output as described below, then reassemble the main unit case.
Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay.
Left Pin + Center Pin = positive
Right Pin + Center Pin = negativ
Branch Feature
Button 1 (default)
Button 2
Button 3
1. Ignition Door Locking
Enabled
Disabled
2. Ignition Door Unlocking
Enabled
Disabled
3. Door Unlock Pulse
Single
Double
4. Door Lock Pulse Length
1 second
3 seconds
0.1 Sec
5. Lock after Start
On
Off
6. Lock after Shutdown
On
Off
7. Engine Run Time
15 minutes
25 minutes
8. Automatic Start Mode
Disabled
2 hours
1 hour
9. Tachless Sense Crank Time
Normal
Extended
Super Extended
10. Engine Type
RPM Mode/RPM Learn Gas Engine
Diesel Engine
11. Ignition 2 Output Program
Ignition 2 Output
Accessory 2 Output Starter 2 Output
12. Unlock Before Start
Disabled
Enabled
13. Horn Chirp
Enabled
Disabled
14. Smart Start Run Monitor
Enabled
Disabled
System Programming
default setting shown
