SCW The Econ D1, Руководство пользователя

Страница: 23 / 180

The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard
starts once the device has loaded.
Operating the Setup Wizard:
1.
Select the system resolution from the drop-down menu. The default resolution is 1280 × 1024/60Hz.
Click
Apply
to save the resolution settings.
Figure 2.1 Start Wizard Interface
Notes:
1. By default, the system resolution is set to 1280 × 1024.
2.
Check the checkbox to enable Setup Wizard when device starts. Click
Next
to continue the setup
wizard.
You can also click
Cancel
to exit the Setup Wizard, or use the Setup Wizard next time by leaving the
"Start wizard when DVR starts?" checkbox checked and exit.
Figure 2.2 Start Wizard Interface
3.
Click
Next
button on the Wizard window to enter the
Login
window, as shown in Figure 2.3.
1) Enter the admin password. By default, the password is 12345.
2) To change the admin password, check the
New Admin Password
checkbox. Enter the new
22