SCULPFUN S10, Руководство по сборке

Страница: 9 / 30

Important Using Tips
50mm
Focusing principle:
1
、
The focal length of the SCULPFUN laser
module is fixed and cannot be changed .
2
、
The specific position of the laser focus is
50mm directly below the edge of the aluminum
alloy shell of the laser module.
3
、
We provide a 50mm measuring aluminum
column to help find the laser focus.
4
、
When the laser is focused on the surface
of the engraved object, it will exert its maximum
engraving effect.
50mm
50mm
measuring
aluminum
column
the surface of the engraved object
edge of the
aluminum
alloy shell
How to adjust the tension
of X and Y belts
1. For the X-axis, just loosen the screw,
tighten it to one side, and then fix the
screw.
2. For the Y-axis, you need to adjust the
hexagonal eccentric nut next to the bottom
roller, which can control the tightness of
the Y-axis. In addition, the tightness of the
Y-axis belt also affects the Y-axis. You can
lift the machine at an angle of 45
°
. If the
beam slides smoothly, it means that the Y-
axis is proper.
X-axis controller
Pull
Adjust with
wrench
Eccentric nut